The POWERMAX V Box X

     The Powermax V Box-X (VBox 10) is the latest actuator positioner & controller on the market.� Released June 2010, it uses the latest software to accurately translate and convert DiSEqC 1.2 commands from your satellite receiver to 36V power to drive your actuator arm in or out (East/West).� 
   Use it with any DiSEqC1.2 satellite receiver and automatically drive the actuator arm to the specific location of the satellite without having to use the remote control supplied by the positioner controller.
    Your receiver is not DiSEqC enabled?� That's OK.� Simply use the remote control supplied with the VBox-X to drive the actuator east or west.�Use it with any satellite receiver, or as a stand alone controller.�The unit comes with a full 1-year warranty.
�
Features:

Compatible with any satellite receiver, including FTA receivers or 4DTV receivers 
Compatible with any Actuator & H-H motor 
3 Digit LED Display 
Drive Dish up to 3M(Optional:5M) 
99 Satellite Positions 
Fine-tune West & East Buttons 
Professional Remote Control 
Overload Protection (Auto-recovery) 
Anti-Noise Design

Technical Specifications

Power Input: 110V AC /50Hz
Power Output: 36 VDC
Max Dish Size: 3.04m / 10-foot
Max Output Current: 305A/4.2A
Max Power Consumption: 80w/100w
Protocol: DiSEqC 1.0/2.0
Positions Memories: 99
Operation by: Either DiSEqC1.2 Receiver or Supplied Remote Control Unit
Display: 3 Digit LED
Resynchronize Function: YES
Manual Buttons: Power, East, West
Protection : Software Limit Protection & Overload Protection