motor/actuator/controller for Big 10' dish and Free to Air FTA satellite receiver moves dish like majic

Glorystar Deal sw got Prot ection Oregon U.S.A.

Free TV, just like it used to be, easy as 1/2/3

FTA (free to air) = NO CREDIT CHECKS/NO CONTRACT/NO MONTHLY COST using a satellite dish and motor with your own local antenna just like a fm antenna in a car has a motor (up/down) and so does the car/truck.

Adding a motor/actuator/controller to a satellite dish allows reception of ALL CHANNELS available from your just a spot on the map!

MOTORIzED SATELLITE DISH TECHNOLOGIES today add everlast and value to a home or business (motor's in business are sign's, moving display's, escalator's, and printer's, dvd drawer's, display's, safes, etc.)

C Band sg-9120 KU Band

The achievement of the motor movement and dish/lnbf combo is that it follows a curve in space called an ellipse. It effectively follows a 22 thousand mile away curve (and skews to them also as each point aimed at is a different one) away "arc" of satellites each taking up only one point on the curve; over 50 satellites from most US properties today for FTA receiver's to tune. Geo-synchronous satellite tv is a concept that became reality; A. Clarke defined it in words/number's; NASA used it; it is really a "space" in digital and works great!

When the motor moves through the ellipse, the dish/lnbf/motor combines all stamped numbers and accrue multi-perfect aims; points the dish to each satellite using elevation mover the motor, declination (on dish for elliptical focusing to each exact point in the sky; a geo-synchronous satellite signal), USALS calculates and positions the system mathmatically / automatically after programming and tuning of installed parts for each spot it aims as receiving only a linear or circular wave (types of signals) and each point is then programmed inside the motor using the receiver's remote control and menu of memories (diseq 1.2 also does it because it assigns each satellite a number 1-xx; and points the dish true south at number 0 just like USALS but not math only) and channels are scanned for each of the satellites received using a polar mount design.

The mounting system of a motor uses the definition of geo-synchronous satellite location acquisition (USALS is universal satellite aquisition service). True south is the direction the "motored mount" needs to be locked down to (bolted to), and true south is the highest the dish will point into the sky. At each direction to the east and west are the horizons, or lowest in the sky "ends" of receptiveness for this type of satellite system. The motor/dish combo also "skews" automagically for any of the satellites it can point at and moves to the correct direction for each satellite scanned and memorized!

A motorized satellite system, though in thinking is old or too expensive to maintain, avails a person with one to watch every channel that is available.

KU Band motor - for 18"-47" dishes

------------------------

DISEqC 1.2/3 Motor to 47" (120 cm.) reflector

sg-6200 SG-6100 manual

out of stock

equipment list - GEOSATpro C1 LNBf; sg2100 diseqc 1.2/3 motor; GEOSATpro HDVR1200; 120 cm. MINI-C Band (4 foot) satellite antenna
This DISEq Motor for a KU Band only (to 47" inch dish) Satellite System; and used on mini-C band (~4 foot) dishes. This is what you need to watch ALL of the available KU Band FTA channels and even receive C Band satellites you can receive, from your home or business. Most parts required for you to complete a better installation, including directions on how to set-up your dish install on this DISEq motor! Included info: this is geared motor made for KU dishes up to 1.2 meter, the DISEq 1.2/3 motor; once in SAGINAW; they are digitally all to re-set with a mind the receiver programs. Buttons outside allow external reset and manual movements used for "arcing" the dish with a meter; but to also set "0" for the receiver to re-program, or initialize its own mind; or memorized channel data.
Using a DISEq 1.2/USALS motor requires 2 different setting's of the dish; one by the mount, and one by the dish. The dish/lnbf combo will then move to any of the satellites without having to "aim" the dish system again.

SG-2100 dieseq 1.2/3 manual in pdf

C+Ku Band only

Over 500 FTA channels (actually, it depends on how many you want to watch, after you blindscan or directly enter your entries); make sure they all work in the industry avail. in your receiver then; oh my! These channels are available this way (motors and big dish), advertising themselves and their productions (many origination points; right onto your HDTV. This number of channels is exactly what the cable and satellite companies do not want you to know (and how many big dishes they have at their studio's).

v box 7 motor controller vbox X DISEqC actuator controller

vbox 7 is big dish mover c band DISEqC controller vbox vII

MOTOR ON polar mount 10' alum. mesh C+KU az/el typed mount has NO MOTOR or ability to motor; is locked to one satellite for the channels

ACME actuator 18 inch to 36 inch @~350 lbs and cost from $79-189 :: Ball Screw actuators can lift 1000 lbs. and cost $299.00 and more.

Used at NASA for their feed channels and other 24 hr. new channels by them; many are provided on the internet you already pay for, but when they debut FTA dvb-s2 mpeg-IV; you too can use own and operate a 10-12 foot c band satellie dish - actuator/motor; polar mount; quad lnbf struts; 4-leg wire/coax combo

Installation download here calculate az/el here

Commercial C/KU Band Satellite TV Cable/Studio Equipment w/o motor's; have multi-sat and the bracket of channel's they "Carry" on their "System"

There are many subscription based platforms today also; considered as Commercial Encryption available via C Band signals in the USA. The Equipment for per-channel carriage is very long and expensive; as entire rooms are the space to use their equipment in (Powerview, Betacrypt, digicipher 2/3, Nagravision, CONAX). These entail an entire industry of Broadcaster's serving many Companies into the consumer platformed HDTV pay only Cable/Internet/Local/PPV/Satellite providers (Google TV, Apple TV, Directv, Dish Network, Shaw, Bell, Sky Mexico, Netflix, Hulu, etc.). They provide secondary Consumer equipment and installations or provider styled CAS/CAM (encryption) they use to provide programming via their own STB which then you pay for to watch a channel/production/$tv. They have the big dish at their studio's; and pay the channels they provide based on Advertising; which is valued lower than the Commercial Equipment they use (and their ads cost per channel also; or user; viewershipments). The local ATSC channels advertising can only be watched using a local antenna; and they are the highest rated programming available Free to Air; on the air; over the air; or terrestrially based. The satellite channels that are free to air are also advertiser supported; or sponsored typically because they are new and compete with like cable or pay tv only channels.

----------------------------------------------------------------------------------------------------------------------------

For the past 20 years and more; I have used a hdtv/dvb-s receiver hooked to a c/ku band satellite dish antenna and lnbf typed for my channel list; and aimed the lnbf/feedhorn assembly using my hands while it is on; at any of these angles on the dish and watched as much FREE TV as I want. You can also it just is not easy until you make your first "bracket" that holds them staticly in place! MOTORING LOWERS THE COST using ONE SATELLITE DISH AND DUAL BAND LNBf's.

The satellite dish actually aims at all satellites and directions from one position; the signals need to be received from them also for it to work. The real angles are somewhat close to this picture; but has no aimed of the part view; which is quite ellaborate in this array type. A feed system is grown onto a dish as channels are added. These lnbf's are placed onto the dish at an angle of reflection the dish is receiving the satellite at; or the lnbf must receive them from.

Over 500 FTA channels (actually, it depends on how many you want after you blindscan or directly enter your entries; make sure they all work in the industry ) avail. in your receiver then; oh my! These channels are available this way (motors and big dish), advertising themselves and their productions right onto your HDTV. This number of channels is exactly what the cable and satellite companies do not want you to know (and how many big dishes they have at their studio's).

multi-satellites equals 20+